Standing Seam Metal Roofs
Filter
Standing Seam Metal Roofs
SS PowerClamp Railless, Kit
Product number: 4000532
The SS PowerClamp Rail-less is a seam clamp and mounting rail all in one piece.
The K2 Flex Foot is a versatile roof attachment that is compatible with nearly all roof types and can be installed to the rafter or decking.
The PowerClamp is K2's roof attachment solution for standing seam metal roofs. This standard version uses two set screws.
Big Foot 6" w/ 3"+ Chem Link Clip
Product number: 4000218
The Big Foot is essentially a large L-Foot that provides more height adjustability. It is also compatible with a 3" Chem Link E-Curb and comes with a clip to help center your mount into the curb.
T-Foot X 6” Kit, Mill
Product number: 4000080
The T-Foot X is K2's roof attachment solution for pitched or low slope roofs. The kit includes the T-Bolt set to attach to the rail.
K2 Mid Clamp Set, Mill
Product number: 4000230
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2 Mid Clamp Set, Dark
Product number: 4000229
K2's updated Mid Clamp has the self-leveling base that was created from our innovative K2 End Clamp.
K2 End Clamp Set, Mill
Product number: 4000197
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
Shared Rail MC+ Silver, SS 43-50mm
Product number: 4000001
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
Shared Rail MC+ Dark, SS 43-50mm
Product number: 4000002
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
Rail Connector CR 44-X, Set, Dark
Product number: 4000052
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Shared Rail EC Silver, SS 46-50mm
Product number: 4000003
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
Rail Connector CR 44-X, Set, Mill
Product number: 4000051
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Shared Rail EC Dark, SS 46-50mm
Product number: 4000004
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
RailConn CR 48-X,48-XL Struct Set, Mill
Product number: 4000385
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
RailConn CR 48-X,48-XL Struct Set, Dark
Product number: 4000386
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
Rail Connector UL 2703 Set, CR80, Mill
Product number: 4001196
K2’s Rail Connector is a more efficient use of material and reduces rail waste. The Set includes the T-Bolt and nut hardware.
Rail Connector UL 2703 Set, CR80, Dark
Product number: 4000329
K2’s Rail Connector is a more efficient use of material and reduces rail waste.
The K2 Edge, Kit is the bracket that holds the system in place.
CrossRail Tilt Connector Set
Product number: 4000505
Piece that connects the rear legs to the north-south rails of the Tilt Up System.
EndCap 44-X , K2
Product number: 4000176
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
CR 48-X, 48-XL, 80 Climber w/Hole, Set
Product number: 4006042-H
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
CR 44-X, Climber Set w/Hole
Product number: 4006043
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
CrossRail Flat EndCap, CR 48-X,48-XL
Product number: 4000431
Flat end cap for the CrossRail 48-X or 48-XL to help enhance the aesthetics of the system.
EndCap, Black, CR80
Product number: 4001221
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
Sleeve CR 44-X, Extrusion
Product number: 4000177
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
CrossRail 3" Black Sleeve 48-X,48-XL
Product number: 4000583
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
Shared Rail Clamp Add-On, Slide In, 10mm
Product number: 4000609
The Add-On for the Shared Rail System is 10mm in height.
13x25mm Bonding T-Bolt Kit
Product number: 4000122
This is a bonding 25mm stainless steel T-Bolt with a 13mm serrrated hex nut.
13x25mm T-Bolt Kit
Product number: 4000048
This is a 25mm stainless steel T-Bolt with a 13mm serrrated hex nut.
Serrated hex nut compatible with M8 size T-Bolts.
Burndy WEEB Lug 10.3
Product number: 4000622
Grounding lug that attaches to the side channel of the CrossRail.
K2 Ground Lug, 13mm Hex Set
Product number: 4000006-H
Top mounted grounding lug compatible with all K2 rail systems.
ILSCO, SGB-4, 4-14 SOL-STR
Product number: 4000960
Grounding lug that attaches to the open end of the rail. It is most commonly used for the MiniRail XPRess and D-Dome Railless² systems.
Dynobond 8"
Product number: 4000354
The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.
MLPE, Module Frame Mount, Kit
Product number: 4000083
The MLPE Module Frame Mount Kit is used to attach microinverters or optimizers to the module frame.
CR Micro inverter & OPT, 13mm Hex Kit
Product number: 4000629-H
Hardware that attaches microinverters or optimizers to the rail.
Standing Seam Metal Roofs
Possible systems
Standing Seam Metal Roofs
Standing Seam Metal Roofs
Standing Seam Metal Roofs
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.