Tile Roofs
Filter
Tile Roofs
K2 Systems offers the USH, 9", Base Kit, w/K2 EverSeal. Pre-installed with EverSeal for a quick and easy application.
K2 Systems offers the USH, 9", Base Kit, w/K2 EverSeal. Pre-installed with EverSeal for a quick and easy application.
K2 Systems offers the Flat Tile Hook X Kit, w/K2 EverSeal. Our EverSeal technology offers a quick and easy installation to save you install time.
K2 Systems offers the USH +2, 5.5" Base Kit, w/K2 EverSeal. The EverSeal is pre-installed and ready for installation.
Tile Hook 3S Wide Base w/Hardware
Product number: 4001294
The Tile Hook 3S is a two piece adjustbale hook. Its base has three levels of height adjustability with 5.5' of east/west adjustability. The top includes a spot to attach an L-Foot.
K2 Mid Clamp Set, Mill
Product number: 4000230
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2 Mid Clamp Set, Dark
Product number: 4000229
K2's updated Mid Clamp has the self-leveling base that was created from our innovative K2 End Clamp.
K2 End Clamp Set, Mill
Product number: 4000197
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
Rail Connector CR 44-X, Set, Mill
Product number: 4000051
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Rail Connector CR 44-X, Set, Dark
Product number: 4000052
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
RailConn CR 48-X,48-XL Struct Set, Mill
Product number: 4000385
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
RailConn CR 48-X,48-XL Struct Set, Dark
Product number: 4000386
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
Rail Connector UL 2703 Set, CR80, Dark
Product number: 4000329
K2’s Rail Connector is a more efficient use of material and reduces rail waste.
Rail Connector UL 2703 Set, CR80, Mill
Product number: 4001196
K2’s Rail Connector is a more efficient use of material and reduces rail waste. The Set includes the T-Bolt and nut hardware.
EverFlash W Tile – R, Mill
Product number: 4000132
The EverFlash Tile Replacement Flashing is feature packed and is available in Flat, S and W tile profiles.
EverFlash Flat Tile – R, Mill
Product number: 4000130
The EverFlash Tile Replacement Flashing is feature packed and is available in Flat, S and W tile profiles.
EverFlash S Tile – R, Mill
Product number: 4000131
The EverFlash Tile Replacement Flashing is feature packed and is available in Flat, S and W tile profiles.
K2 Tile Hood Flashing, Mill
Product number: 4000008
The K2 Tile Hood is a deck flashing that gives extra waterproofing protection by completely covering the hook penetrations.
The K2 Edge, Kit is the bracket that holds the system in place.
EndCap 44-X , K2
Product number: 4000176
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
CrossRail Flat EndCap, CR 48-X,48-XL
Product number: 4000431
Flat end cap for the CrossRail 48-X or 48-XL to help enhance the aesthetics of the system.
EndCap, Black, CR80
Product number: 4001221
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
Sleeve CR 44-X, Extrusion
Product number: 4000177
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
CrossRail 3" Black Sleeve 48-X,48-XL
Product number: 4000583
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
Stainless steel 3" lag screw with a preassembled EPDM washer.
13x25mm T-Bolt Kit
Product number: 4000048
This is a 25mm stainless steel T-Bolt with a 13mm serrrated hex nut.
13x25mm Bonding T-Bolt Kit
Product number: 4000122
This is a bonding 25mm stainless steel T-Bolt with a 13mm serrrated hex nut.
Serrated hex nut compatible with M8 size T-Bolts.
Burndy WEEB Lug 10.3
Product number: 4000622
Grounding lug that attaches to the side channel of the CrossRail.
K2 Ground Lug, 13mm Hex Set
Product number: 4000006-H
Top mounted grounding lug compatible with all K2 rail systems.
ILSCO, SGB-4, 4-14 SOL-STR
Product number: 4000960
Grounding lug that attaches to the open end of the rail. It is most commonly used for the MiniRail XPRess and D-Dome Railless² systems.
Dynobond 8"
Product number: 4000354
The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.
CR Micro inverter & OPT, 13mm Hex Kit
Product number: 4000629-H
Hardware that attaches microinverters or optimizers to the rail.
MLPE, Module Frame Mount, Kit
Product number: 4000083
The MLPE Module Frame Mount Kit is used to attach microinverters or optimizers to the module frame.
Wire Management Clip, TC
Product number: 4000069
The TC Wire Clip is a top-mounted wire management solution that is compatible with all of K2's rail profiles.
HEYClip SunRunner Cable Clip SS, S6404
Product number: 4000382
The HEYClip SunRunner Cable Clip locks over the lip of the rail to manage wires on the side of the rail.
Wire Management Clip, Omega, Black
Product number: 4005394
The Omega Clip is a side channel cable clip for CrossRail and MiniRail systems.
K2's Universal Mid Clamp is compatible with all our systems.
Tile Roofs
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.