Back

Rails are matched to the new module sizes

New lengths for SingleRail, SolidRail and SpeedRail and further updates

Every year again: New rail lengths for the new module dimensions

We are changing the rail lengths of the SingleRail, SolidRail and SpeedRail to the new lengths of 2.25 / 3.30 / 4.40 / 5.50 meters. This saves you waste and the installation stays simple and fast.

After several years in which we did not have to change the rail lengths, we now adjust them almost every year. We are driven by the desire to optimally coordinate this with the different module dimensions in order to make the installation as efficient as possible.


The new lengths will be completely available from August 2020! We already have some of the new lengths in stock, as the changeover in the rail sector is very complex. This may therefore lead to changes in deliveries.

we adapt the rail lengths to the changed module sizes for singlerail, solidrail and speedrail
 

Further updates for our products

Hanger bolt M10 Sets for SingleRail

Hanger bolt M10 Sets for SingleRail

The three hanger bolts (M10×180 / M10×200 / M10×250) get a new article number, because we have slightly changed the single components in the set.

Nevertheless, the 'old' and 'new' versions can be installed together without any problems.

S-Dome Classic: Windbreaker now in Magnelis

S-Dome Classic: Windbreaker now in Magnelis

We have changed the windbreaker material from aluminium to Magnelis®. The new material protects the surface more effectively due to its specific coating properties.
It is sheet steel, which at the same time has a higher dead weight than aluminium, which has a positive effect on the additional ballast.

 

Back

Go back