Simple solution for cable management
"Simply...click & go": The PVX Multimount® cable management system
The product enables a safe and structured cable management on the flat roof. The cables of the PV system can be routed from the roof in two ways: Either via two cable feedthroughs or via an additional mesh cable tray attached to the product.
- Secure placement of cable harnesses, electrical pipes or mesh cable trays
- Very fast installation without tools with integrated ballasting
- Tube feedthroughs with simple clamping device
- Flexible support of the most common wire basket channels
- Consists of 80 % UV-resistant recycled material
- Cooperation partner: PVX Multimount®, Gorinchem (Netherlands)
- For every PVX Multimount® sold, 5 cents go to the Kiki Foundation, which supports social projects in the Netherlands.
Tube feedthroughs
In a PVX Multimount® you can lay two tubes with several cables (Ø 16 - 32 mm).
The cable conduits are securely fixed by the simple clamping device.
Mesh cable trays
You can attach up to three baskets to a PVX Multimount® using a simple click mechanism.
The standardised baskets (width between 35 - 100 mm) can be purchased from your electrical wholesaler, for example.
Technical information
- Weight: 1.12 kg
- 100 % UV-resistant
- Temperature: -40°C up to +60°C
- Max. load: 50 kg
Planning of the PVX Multimount®
Planning of the cable management solution in the Base planning software will be possible soon.
In the meantime, please send your inquiry to K2 Systems, your distributor or PVX Multimount®.
