Dome 6 Systems

  • 80% pre-assembled and 50% faster to install thanks to improved components
  • The handy Dome Speed Spacer distance gauge provides time-saving rail alignment
  • Secure anchoring with fixed connection for roofs ≤ 10° and low load reserves
Symbols Properties Dome 6 Mounting systems

Dome 6: Components and their advantages

Pre-assembled rail sets

  • Designed for current and future module sizes
  • Set completely pre-assembled and click system for Peaks
  • Tool-free assembly without screws

RailConnector

  • Quick and easy rail connector with hitch pin
  • No screw connection necessary
  • Compensates tolerances by means of floating bearings
Demo video

Universal module clamps:

MiniClamp MC/EC

 

  • Clamping range 30 - 50 mm
  • Compatible with MiniRail, MicroRail and Dome V systems
  • Optional: Potential equalization with TerraGrif possible

Mat S

  • Shear soft Mat S made of EPDM – only 1 size and 1 variant and no aluminium lamination necessary
  • Takes up and compensates for tolerances
  • High friction coefficients reduce ballast

Dome FixPro Set

  • Extends the application possibilities of Dome 6 systems
  • Fixed connection for roofs with inclination ≤ 10°
  • Required for roof pitches ≥ 3°
  • Recommended for roofs with low load reserves

Dome Speed Spacer

A new assembly aid

 

  • Simple alignment of the rails on the roof using the flexible spacer template
  • Simply adjust the module length and set the rail spacing
  • Suitable for all K2 flat roof systems

 

Demo video

Components

Downloads

Product data sheet and brochures

Assembly instructions and checklists

Videos

Illustration Modulfreigabe

Approved modules

Here you find a list of modules which are approved for our Dome 6 flat roof systems.

 

Approved modules

Technical data

 
D-Dome 6.10
S-Dome 6.10
Scope of application

Flat roofs ≤ 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/­roof fixture

  • Ballasted and no roof penetration for inclination: ≤ 3°
  • With fixed connection at inclination with Dome FixPro Set: > 3°
Require­ments

  • Permissible module dimensions (L×W×H): 1448-2150 × 950-1060 × 30-50mm
  • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
  • Clamping at the short module side permitted (see module approvals…)
Technical specifications

  • Thermal separation after a maximum of 16m
  • Minimum distance to the edge of the roof 600mm

  • Thermal separation after a maximum of 15m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Windbreaker: Magnelis
  • Mat S protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
D-Dome 6.10
Scope of application

Flat roofs ≤ 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/­roof fixture

  • Ballasted and no roof penetration for inclination: ≤ 3°
  • With fixed connection at inclination with Dome FixPro Set: > 3°
Require­ments

  • Permissible module dimensions (L×W×H): 1448-2150 × 950-1060 × 30-50mm
  • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
  • Clamping at the short module side permitted (see module approvals…)
Technical specifications

  • Thermal separation after a maximum of 16m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Windbreaker: Magnelis
  • Mat S protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
S-Dome 6.10
Scope of application

Flat roofs ≤ 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/­roof fixture

  • Ballasted and no roof penetration for inclination: ≤ 3°
  • With fixed connection at inclination with Dome FixPro Set: > 3°
Require­ments

  • Permissible module dimensions (L×W×H): 1448-2150 × 950-1060 × 30-50mm
  • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
  • Clamping at the short module side permitted (see module approvals…)
Technical specifications

  • Thermal separation after a maximum of 15m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Windbreaker: Magnelis
  • Mat S protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70

Side views

D-Dome 6 Seitenansicht
D-Dome 6.10
S-Dome 6 Seitenansicht
S-Dome 6.10