Dome V Systems

  • Our know-how of the last few years, many optimisations and improvements have gone into these systems.
  • Clearly ballast- and component-optimized system due to better friction coefficient of the flexible support pad
  • Simultaneous assembly of modules and mounting system as well as reduced screw connections ensure faster installation
  • Lower logistics costs due to lower transport volume
Symbols Features Dome V Mounting Systems

Optimized Dome V Systems

A totally modular solution:

  • 1 Peak for all
  • 3 systems
  • 5 common components
Mat V

Mat V

  • Flexible Mat V made of EPDM – only 1 size and 1 variant
  • Absorbs and compensates for tolerances
  • Friction coefficients reduce ballast

 

 

Dome V elevation

Dome V elevation

  • Innovative geometry and connections to accommodate tolerances
  • Single screw connection and fast screw-in assembly of the SD with fixation via module clamp
  • Low transport volume
Rail

Rail

  • Integrated ballast tray almost eliminates the need for additional components
  • Short rails help compensate for roof tolerance
Universal module clamps: MiniClamp MC/EC

Universal module clamps: MiniClamp MC/EC

  • Clamping range 30 - 50 mm
  • Compatible with the MiniRail System
  • Optional: Equipotential bonding with TerraGrif possible

References

Components

Downloads

Available in the respective languages  

Product data sheet and Brochure

Assembly instructions and Checklist

Tender specifications and certificates

Document type
Recommendations lightning protection and equipotential bonding
Tender speci­fi­ca­tion  D-Dome V 10°
Tender speci­fi­ca­tion  S-Dome V 10°
Tender speci­fi­ca­tion  S-Dome V 15°
Expert's report wind loads  D-Dome V 10°
Expert's report wind loads  S-Dome V 10°
Expert's report wind loads  S-Dome V 15°
Certificate Structural Analyses  D-Dome V 10°
Certificate Structural Analyses  S-Dome V 15°

Videos

Approved modules

Here you find a list of modules which are approved for our Dome V flat roof systems.

 

Technical data

 
D-Dome V 10°
D-Dome V 10°
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

    Requirements

    • Permissible module dimensions (L×W×H): 1386-2100 × 985-1053 × 30-50mm
    • Minimum system size: 2 supports (4 modules)
    • Module approved for corner clamping (see approved modules…)
    Technical specifications

    • Thermal separation after a maximum of 15.5m
    • Minimum distance to the edge of the roof 600mm
    Inclination angle

    10°

    Material

    • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
    • Mat V protective mat: EPDM
    • Small parts: stainless steel (1.4301) A2-70
    D-Dome V 10°
    D-Dome V 10°
    Scope of application

    Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

    Fastening type/roof fixture

    Ballasted; no roof penetration for inclination ≤ 3°

    Requirements

    • Permissible module dimensions (L×W×H): 1386-2100 × 985-1053 × 30-50mm
    • Minimum system size: 2 supports (4 modules)
    • Module approved for corner clamping (see approved modules…)
    Technical specifications

    • Thermal separation after a maximum of 15.5m
    • Minimum distance to the edge of the roof 600mm
    Inclination angle

    10°

    Material

    • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
    • Mat V protective mat: EPDM
    • Small parts: stainless steel (1.4301) A2-70

    Side views

    D-Dome V side view
    D-Dome V
     
    S-Dome V 10°
    S-Dome V 15°
    S-Dome V 10°
    S-Dome V 15°
    Scope of application

    Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

    Fastening type/roof fixture

    Ballasted; no roof penetration for inclination ≤ 3°

      Requirements

      • Permissible module dimensions (L×W×H): 1550-1760 / 1880-2100 × 950-1053 × 30-50mm
      • Minimum system size: 2 modules
      • Module approved for corner clamping (see approved modules…)
      Technical specifications

      • Thermal separation after a maximum of 15.5m
      • Minimum distance to the edge of the roof 600mm
      Inclination angle

      10°

      15°

      Material

      • Mounting rails, Peak, Basic, SD and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
      • Windbreaker: Magnelis
      • Mat V protective mat: EPDM
      • Small parts: stainless steel (1.4301) A2-70
      S-Dome V 10°
      S-Dome V 10°
      Scope of application

      Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

      Fastening type/roof fixture

      Ballasted; no roof penetration for inclination ≤ 3°

      Requirements

      • Permissible module dimensions (L×W×H): 1550-1760 / 1880-2100 × 950-1053 × 30-50mm
      • Minimum system size: 2 modules
      • Module approved for corner clamping (see approved modules…)
      Technical specifications

      • Thermal separation after a maximum of 15.5m
      • Minimum distance to the edge of the roof 600mm
      Inclination angle

      10°

      Material

      • Mounting rails, Peak, Basic, SD and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
      • Windbreaker: Magnelis
      • Mat V protective mat: EPDM
      • Small parts: stainless steel (1.4301) A2-70
      S-Dome V 15°
      S-Dome V 15°
      Scope of application

      Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

      Fastening type/roof fixture

        Requirements

        • Permissible module dimensions (L×W×H): 1550-1760 / 1880-2100 × 950-1053 × 30-50mm
        • Minimum system size: 2 modules
        • Module approved for corner clamping (see approved modules…)
        Technical specifications

        • Thermal separation after a maximum of 15.5m
        • Minimum distance to the edge of the roof 600mm
        Inclination angle

        15°

        Material

        • Mounting rails, Peak, Basic, SD and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
        • Windbreaker: Magnelis
        • Mat V protective mat: EPDM
        • Small parts: stainless steel (1.4301) A2-70

        Side views

        S-Dome V side view
        S-Dome V 10°
        S-Dome V side view
        S-Dome V 15°