D-Dome V & S-Dome V

Flat roof mounting systems Generation V

The Dome V systems are the next mounting system generation for flat roof installations. These systems embody all our know-how of the last years, many optimisations and improvements.

  • D-Dome & S-Dome V with modified geometry and improved absorption of tolerances
  • Short mounting rails with an integrated ballast tray
  • Flexible EPDM support pad:
    • Compensates tolerances
    • Better friction coefficient reduces ballasting
  • Lower transport volume reduces logistics costs
  • Aerodynamically optimised based on wind tunnel tests
Symbols for Dome V mounting system properties

Dome V Components and their advantages

Video

Watch our video about the Dome V Systems and get to know the advantages of the flat roof systems Generation V.

Mat V + Rail

  • The flexible Mat V EPDM support pad can absorb tolerances and protects the roof cover
  • The mounting rail is connected to the Mat V with a simple sliding motion and has an integrated ballast tray.

Dome V SD and Peaks with Basis

  • Modified geometry to absorb tolerances and material-optimised
  • Only one screw connection
  • Lower volume and weight

Universal module clamp: MiniClamp MC/EC

  • Clamping range 30 - 50 mm
  • Compatible with the S-Rock and MiniRail System

Dome V in Base On

D-Dome V and S-Dome V are already integrated in Base On. You can plan the new Dome V systems for your projects in the usual way. Base On outputs the following:

  • Static analysis
  • Detailled ballast- and assembly plan
  • Complete bill of materials
Dome V system selection in Base On

Product details

Components

References

Approved modules flat roof systems

Our flat roof systems require a clamp on the short side of the modules. On the link "approved modules" you will find a list of all compatible modules. 

If your module is missing in the list, please call us +49 (0)7159-42059-0 or write an e-mail info@k2-systems.com.

Technical data

D-Dome V side view
D-Dome V side view and construction principle
S-Dome V side view
S-Dome V side view and construction principle
 
D-Dome V
S-Dome V
D-Dome V system
S-Dome V system
Scope of application

Flat roofs with a foil or bitumen roof cover and laid on concrete or gravel

Fastening type/roof fixture

Stable, if necessary with ballasting, no roof penetration

Requirements

  • Permissible module dimensions (L×W×H): 1386-2080 × 950-1100 × 30-50mm
  • Minimum system size: 2 supports (4 modules)

  • Permissible module dimensions (L×W×H): 1386-2067 × 950-1100 × 30-50mm
  • Minimum system size: 2 modules
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
D-Dome V
D-Dome V system
Scope of application

Flat roofs with a foil or bitumen roof cover and laid on concrete or gravel

Fastening type/roof fixture

Stable, if necessary with ballasting, no roof penetration

Requirements

  • Permissible module dimensions (L×W×H): 1386-2080 × 950-1100 × 30-50mm
  • Minimum system size: 2 supports (4 modules)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
S-Dome V
S-Dome V system
Scope of application

Flat roofs with a foil or bitumen roof cover and laid on concrete or gravel

Fastening type/roof fixture

Stable, if necessary with ballasting, no roof penetration

Requirements

  • Permissible module dimensions (L×W×H): 1386-2067 × 950-1100 × 30-50mm
  • Minimum system size: 2 modules
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
This website uses cookies to offer a better user experience for you. More