D-Dome V & S-Dome V

Flat roof mounting systems Generation V

The Dome V systems are the next mounting system generation for flat roof installations. These systems embody all our know-how of the last years, many optimisations and improvements.

  • Clearly ballast- and component-optimized system due to better friction coefficient of the flexible support pad
  • Simultaneous assembly of modules and mounting system as well as reduced screw connections ensure faster installation
  • Lower logistics costs due to lower transport volume
Symbols for properties of Dome V mounting systems

Dome V Components and their advantages

Mat V

  • Flexible Mat V made of EPDM – only 1 size and 1 variant (no aluminium lamination required)
  • Absorbs and compensates for tolerances
  • Friction coefficients reduce ballast

Dome V elevation

  • Innovative geometry and connections to accommodate tolerances
  • Single screw connection and fast screw-in assembly of the SD with fixation via module clamp
  • Low transport volume

Rail

  • Integrated ballast tray almost eliminates the need for additional components
  • Short rails help compensate for roof tolerance

Universal module clamps: MiniClamp MC/EC

  • Clamping range 30 - 50 mm
  • Compatible with the MiniRail System
  • Optional: Equipotential bonding with TerraGrif possible

Did you know that…

…230 people with a disability or mental illness support us in the assembly and packing of the K2 products.

 

Learn more about our great cooperation with the social institutions in Southern Germany.

Dome V in Base

D-Dome V and S-Dome V are already integrated in Base. You can plan the new Dome V systems for your projects in the usual way. Base outputs the following:

  • Static analysis
  • Detailled ballast- and assembly plan
  • Complete bill of materials
Dome V system selection in Base

Product details

Components

References

Videos

Approved modules flat roof systems

Our flat roof systems require a clamp on the short side of the modules. On the link "approved modules" you will find a list of all compatible modules. 

If your module is missing in the list, please call us +49 (0)7159-42059-0 or write an e-mail info@k2-systems.com.

Technical data

D-Dome V

D-Dome V side view
D-Dome V side view and construction principle
 
D-Dome V
D-Dome V System
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

Requirements

  • Permissible module dimensions (L×W×H): 1386-2080 × 985-1053 × 30-50mm
  • Minimum system size: 2 supports (4 modules)
  • Module approved for corner clamping (see approved modules…)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
D-Dome V
D-Dome V System
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

Requirements

  • Permissible module dimensions (L×W×H): 1386-2080 × 985-1053 × 30-50mm
  • Minimum system size: 2 supports (4 modules)
  • Module approved for corner clamping (see approved modules…)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70

S-Dome V 10°/15°

S-Dome V 10° side view
S-Dome V 10° side view and construction principle
S-Dome V 15° side view
S-Dome V 15° side view and construction principle
 
S-Dome V 10°
S-Dome V 15°
S-Dome V 10° System
S-Dome V 15° System
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

Requirements

  • Permissible module dimensions (L×W×H):
    1550-1760 / 1880-2100 × 950-1053 × 30-50mm
  • Minimum system size: 2 modules
  • Module approved for corner clamping (see approved modules…)

  • Permissible module dimensions (L×W×H):
    1550-1760 / 1880-2100 × 950-1053 × 30-50mm
  • Minimum system size: 2 modules
  • Module approved for corner clamping (see approved modules…)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

15°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
S-Dome V 10°
S-Dome V 10° System
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

Requirements

  • Permissible module dimensions (L×W×H):
    1550-1760 / 1880-2100 × 950-1053 × 30-50mm
  • Minimum system size: 2 modules
  • Module approved for corner clamping (see approved modules…)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

10°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
S-Dome V 15°
S-Dome V 15° System
Scope of application

Flat roofs ≤ 5° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

Fastening type/roof fixture

Ballasted; no roof penetration for inclination ≤ 3°

Requirements

  • Permissible module dimensions (L×W×H):
    1550-1760 / 1880-2100 × 950-1053 × 30-50mm
  • Minimum system size: 2 modules
  • Module approved for corner clamping (see approved modules…)
Technical specifications

  • Thermal separation after a maximum of 15.5m
  • Minimum distance to the edge of the roof 600mm
Inclination angle

15°

Material

  • Mounting rails, Peak, Basic, SD, Windbreaker and MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
  • Mat V protective mat: EPDM
  • Small parts: stainless steel (1.4301) A2-70
This website uses cookies to offer a better user experience for you. More