MultiRail mounting system on gas station roof
MultiRail System
The MultiRail mounting system for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. It blends roof connection with module railing in one single component.
- Easy and proven – as a short rail or a flexible component in various lengths
- Quick planning with less material and greater effectiveness
Did you know that
… people with a disability or mental illness support us in the mounting of the EPDM tape to the MultiRail.
Learn more about our great cooperation with the social institutions.
Product details
Components MultiRail
MultiRail 10
MultiRail 25/4
MultiRail 4.20
TerraGrif K2SZ
References MultiRail
MultiRail installation in Ober-Mörlen, Germany
Assembly of a 146.12 kWp installation with MultiRail
MultiRail mounting system on gas station roof
MultiRail system in Thailand (DHYBRID)
Banana plantation with MultiRail installation (DHYBRID)
Refence project in Romania
MultiRail system with elevation
MultiRail mounting system on trapezoidal sheet metal
Details of the MultiRail mounting system
MultiRail mounting system on trapezoidal sheet metal
Downloads MultiRail
Document type
Product data sheet
Brochure Pitched roof systems
Accessories Pitched roof
Checklist Trapezoidal sheet metal / sandwich panel
Assembly instructions
Tender specification
Technical Data
MultiRail 10, 25/4, 4,20
Scope of application
Pitched roofs, 5 - 75°, with trapezoidal sheet or sandwiched trapezoidal sheet
Fastening type / roof fixture
Fastened with self-tapping sheet screws
Requirements
- Sheet thickness: ≥ 0.4 mm steel and ≥ 0.5 mm aluminium
- Sandwiched trapezoidal sheet: Approval from manufacturer required
- Crest width: At least 22 mm
- Maximum crest width: Independent
Material
Aluminium (EN AW-6063 T66); EPDM
W = width [mm]
39
H = height [mm]
35
Rail length [mm]
- MultiRail 10: 100
- MultiRail 25/4: 250
- MultiRail 4.20: 4200
Second rail layer
SingleRail
MultiRail 10, 25/4, 4,20
Scope of application
Pitched roofs, 5 - 75°, with trapezoidal sheet or sandwiched trapezoidal sheet
Fastening type / roof fixture
Fastened with self-tapping sheet screws
Requirements
- Sheet thickness: ≥ 0.4 mm steel and ≥ 0.5 mm aluminium
- Sandwiched trapezoidal sheet: Approval from manufacturer required
- Crest width: At least 22 mm
- Maximum crest width: Independent
Material
Aluminium (EN AW-6063 T66); EPDM
W = width [mm]
39
H = height [mm]
35
Rail length [mm]
- MultiRail 10: 100
- MultiRail 25/4: 250
- MultiRail 4.20: 4200
Second rail layer
SingleRail
Dimensioning scheme MultiRail
w = width / H = height / L = lengths