S-Dome 10° flat roof system

The solution for single-sided elevation

 

The S-Dome system is suitable for nearly all types of flat roofs. It is very easy to install using fewer K2 System components.

  • A system for structurally challenging roofs with limited ballast options
  • Aerodynamically optimised as a result of wind tunnel testing
  • Quick and easy handling
  • Also available as a short rail system

  • Symbol flat roof
  • Symbol trapezoidal sheet metal
  • Symbol one-sided elevation
  • Symbol pallets ware
Illustration S-Dome on trapezoidal sheet metal roof

S-Dome as additional elevation

S-Dome can also be mounted on trapezoidal sheet metal roofs.

Base On: Plan your mounting system online

Future-oriented planning with satellite images, graphical tools and detailed project reports.

Here you can find all benefits of Base On at a glance.

 

Product details

Components S-Dome 10° System

References

Downloads S-Dome 10°

Document type
Product data sheet
English
French
German
Italian
Portuguese
Spanish
Brochure  Flat roof
English
French
German
Italian
Polish  (short version)
Portuguese
Spanish
Accessories  Flat roof
English
French
German
Italian
Portuguese
Spanish
Checklist  Flat roof
English
French
German
Italian
Spanish
Assembly instructions  S-Dome Classic
English
French
German
Italian
Assembly instructions  S-Dome 2.0
English
German
Italien
Assembly instructions  Trapezoidal sheet metal
English
French
German
Italian
Lightning Protection  S-Dome 2.0
English
German
French
Lightning Protection  S-Dome Classic
English
German
French
Italian
Tender specification
Certificate  Structural Analyses
English
German
Expert's report wind loads
English
German

Videos

Approved modules Flat-roof-systeme

Our flat roof systems require a clamp on the short side of the modules. On the link "approved modules" you will find a list of all compatible modules. 

If your module is missing in the list, please call us +49 (0)7159-42059-0 or write an e-mail info@k2-systems.com.

Technical Data

Side view S-Dome system
 
S-Dome
Scope of application

Flat roofs < 5° with film and bitumen covering or concrete; also trapezoidal sheet metal roofs with continuous mounting rails

Fastening type/roof fixture

Stable, with ballasting if necessary; no roof penetration up to 3°

Requirements

  • Permissible module dimensions (L × W × H): 1386-2067 × 950-1100 × 30-50mm
  • Minimum system size: 2 modules
  • Roof inclination of up to 5°
Technical specifications

  • Thermal separation after max. 11m (trapezoidal sheet metal 8.4m)
  • Minimum clearance to roof edge 600 mm
Inclination angle

10°

Material

  • Mounting rails, S-Dome, Dome SD, Windbreaker, module clamps, rail connectors: Aluminium EN AW-6063 T66
  • Building protection mat with or without aluminium lining (PUR-bound rubber granules)
  • Small parts: Stainless steel (1.4301) A2-70
S-Dome
Scope of application

Flat roofs < 5° with film and bitumen covering or concrete; also trapezoidal sheet metal roofs with continuous mounting rails

Fastening type/roof fixture

Stable, with ballasting if necessary; no roof penetration up to 3°

Requirements

  • Permissible module dimensions (L × W × H): 1386-2067 × 950-1100 × 30-50mm
  • Minimum system size: 2 modules
  • Roof inclination of up to 5°
Technical specifications

  • Thermal separation after max. 11m (trapezoidal sheet metal 8.4m)
  • Minimum clearance to roof edge 600 mm
Inclination angle

10°

Material

  • Mounting rails, S-Dome, Dome SD, Windbreaker, module clamps, rail connectors: Aluminium EN AW-6063 T66
  • Building protection mat with or without aluminium lining (PUR-bound rubber granules)
  • Small parts: Stainless steel (1.4301) A2-70
This website uses cookies to offer a better user experience for you. More