S-Dome Small System

The S-Dome Small elevation fixture for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. The roof connection is based on the MultiRail mounting railing.

  • For a roof inclination of up to 15° on trapezoidal sheet metal
  • Economical in terms of materials and transportation; clever connections and strong holding power
  • The perfect combination of the all-round MultiRail component and load-optimised, slim elevations

  • Symbol flat roof
  • Symbol pitched roof
  • Symbol trapezoidal sheet metal roof
  • Symbol one-sided elevation
  • Symbol pallets ware

Would you like to plan this K2 mounting system?

There are different ways to plan a K2 mounting system:

 

  • Use planning software Base On
  • Use our project request form
  • Download checklist, fill it out and send it to us

Product details

Components S-Dome Small

References S-Dome Small

Downloads S-Dome Small

Document type
Product data sheet
English
French
German
Italian
Portuguese
Spanish
Brochure  Pitched roof
English
French
German
Italian
Polish  (short version)
Portuguese
Accessories  Pitched roof
English
French
German
Italian
Portuguese
Checklist  Trapezoidal sheet metal / sandwich panel
English
French
German
Italian
Spanish
Assembly instructions
English
French
German
Italian
Static proof
English
German

Technical Data

Side-view S-Dome Small System
 
S-Dome Small
Scope of application

Flat or pitched roofs ≤ 15° with trapezoidal sheet metal roofing

Fastening type/roof fixture

Attached with drilling screws in trapezoidal sheets, parallel to high bead

Requirements

  • Sheet thickness for aluminium/steel: min. 0.5 mm
  • Tensile strength for aluminium: 165 N/mm²
  • Tensile strength for steel: according to approval min. S235 in acc. w/ DIN EN 10025-1
  • Crest width: min. 22 mm
  • Crest spacing: independent
Inclination angle

10°

Material

  • Mounting rails, Dome SD Small, Dome S1000 Small, FlexClamp Small: Aluminium (EN AW-6063 T66/ EN AW-6082 T6); EPDM
  • Small parts: Stainless steel (1.4301) A2
S-Dome Small
Scope of application

Flat or pitched roofs ≤ 15° with trapezoidal sheet metal roofing

Fastening type/roof fixture

Attached with drilling screws in trapezoidal sheets, parallel to high bead

Requirements

  • Sheet thickness for aluminium/steel: min. 0.5 mm
  • Tensile strength for aluminium: 165 N/mm²
  • Tensile strength for steel: according to approval min. S235 in acc. w/ DIN EN 10025-1
  • Crest width: min. 22 mm
  • Crest spacing: independent
Inclination angle

10°

Material

  • Mounting rails, Dome SD Small, Dome S1000 Small, FlexClamp Small: Aluminium (EN AW-6063 T66/ EN AW-6082 T6); EPDM
  • Small parts: Stainless steel (1.4301) A2
This website uses cookies to offer a better user experience for you. More