SpeedRail mounting system on gas station roof
SpeedRail System
The SpeedRail mounting system for photovoltaic assemblies was developed specifically for trapezoidal sheet metal. In Germany, the system is AbZ certified.
- The proven long rail system for trapezoidal sheet applications as well as floating suspension with controlled thermal linear expansion
- Our most popular system – over 1 GW installed worldwide
- All-rounder with only 4 installation steps – also suitable for high loads
Did you know that
... employees at the Theo Lorch Workshops in Bietigheim, Southern Germany, apply the EPDM tape to the SpeedClips.
Learn more about our great cooperation with the social institutions.
Product details
Components SpeedRail System
SpeedRail 22
SpeedClip
SpeedLock
SpeedConnector
AddOn
TerraGrif K2SZ
TerraGrif K2PA
References SpeedRail
SpeedRail mounting system on an office building
SpeedRail mounting system on gas station roof
SpeedRail mounting system
SpeedRail System with 999 kWp in Germany
SpeedRail mounting system on gas station roof
SpeedRail System in Hungary
Wall mounted SpeedRail System (tailored solution)
Reference of the SpeedRail System
SpeedRail mounting system
SpeedRail mounting system on industrial roof tops
SpeedRail mounting system on trapezoidal sheet metal
Portrait installed SpeedRail mounting system
SpeedRail mounting system installed in France
Downloads SpeedRail
Document type
Product data sheet
Brochure Pitched roof
Accessories Pitched roof
Checklist Trapezoidal sheet metal / sandwich panel
Assembly instructions
Tender specification
Static certificate SpeedRail on sandwich components
Videos
Technical Data
SpeedRail System
Scope of application
Trapezoidal sheet roof
Fastening type / roof fixture
Insertion mounting into SpeedClips and screws in the roofing
Requirements
- Sheet thickness: ≥ 0.4 mm steel and ≥ 0.5 mm aluminium
- Sandwich panel: Approval from manufacturer required
- Crest width: At least 22 mm
- Flush area surrounding the bore hole: Ø ≥ 20 mm
Material
- SpeedRail: Aluminium (EN AW-6063 T66; 0,64 kg/m)
- SpeedClip: Fibreglass-reinforced polyamide with EPDM
SpeedRail dimensions
(W×H×L) 63 mm × 22,5 mm × 1.15/3.25/4.30/5.40 m
SpeedClip dimensions
See drawing
Second rail layer
SingleRai or SolidRail
SpeedRail System
Scope of application
Trapezoidal sheet roof
Fastening type / roof fixture
Insertion mounting into SpeedClips and screws in the roofing
Requirements
- Sheet thickness: ≥ 0.4 mm steel and ≥ 0.5 mm aluminium
- Sandwich panel: Approval from manufacturer required
- Crest width: At least 22 mm
- Flush area surrounding the bore hole: Ø ≥ 20 mm
Material
- SpeedRail: Aluminium (EN AW-6063 T66; 0,64 kg/m)
- SpeedClip: Fibreglass-reinforced polyamide with EPDM
SpeedRail dimensions
(W×H×L) 63 mm × 22,5 mm × 1.15/3.25/4.30/5.40 m
SpeedClip dimensions
See drawing
Second rail layer
SingleRai or SolidRail
Dimensioning scheme SpeedRail/SpeedClip
w = width / H = height / L = lengths