Dome 6 Systems

    • 80% pre-assembled and 70% faster to install thanks to improved components
    • For more flexibility - also available with long rails (unmounted) for on-site assembly
    • The handy Dome Speed Spacer distance gauge provides time-saving rail alignment
    • Secure anchoring with fixed connection for roofs < 10° and low load reserves
    Symbols Properties Dome 6 Mounting systems

    Dome Speed Spacer

    A new assembly aid

     

    • Simple alignment of the rails on the roof using the flexible spacer template
    • Simply adjust the module length and set the rail spacing
    • Suitable for all K2 flat roof systems

     

    References

    Components

    Downloads

    Product data sheet and brochures

    Document type
    Product data sheet  EN
    Product data sheet  PT
    Brochure Flat roof systems  EN
    Brochure Flat roof systems  PT
    Accessories Flat roof systems  EN
    Accessories Flat roof systems  PT

    Assembly instructions and checklists

    Document type
    Assembly manual D-Dome 6.10
    Assembly manual S-Dome 6.10
    Checklist Flat roof systems  EN
    Checklist Flat roof systems  PT

    Certificates

    Document type
    Certificate  Structural Analyses D-Dome 6.10
    Certificate  Structural Analyses S-Dome 6.10

    Videos

    Approved modules

    Here you find a list of modules which are approved for our Dome 6 flat roof systems.

     

    Technical data

     
    D-Dome 6.10
    S-Dome 6.10
    Scope of application

    Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

    Fastening type/­roof fixture

    • Ballasted and no roof penetration for inclination: ≤ 3°
    • With fixed connection at inclination with Dome FixPro: > 3°
    Require­ments

    • Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
    • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
    • Clamping at the short module side permitted (see module approvals…)
    Technical specifications Base rail

    • Rail set max. 16m
    • Long rail max. 12m

    • Rail set max. 15m
    • Long rail max. 12m
    Technical specifications Module row

    • Rail set max. 16m
    • Long rail max. 16m

    • Rail set max. 15m
    • Long rail max. 15m
    Minimum distance to the edge of the roof

    600mm

    Inclination angle

    10°

    Material

    • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
    • Windbreaker: Magnelis
    • Mat S protective mat: EPDM
    • Small parts: stainless steel (1.4301) A2-70
    D-Dome 6.10
    Scope of application

    Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

    Fastening type/­roof fixture
    • Ballasted and no roof penetration for inclination: ≤ 3°
    • With fixed connection at inclination with Dome FixPro: > 3°
    Require­ments
    • Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
    • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
    • Clamping at the short module side permitted (see module approvals…)
    Technical specifications Base rail
    • Rail set max. 16m
    • Long rail max. 12m
    Technical specifications Module row
    • Rail set max. 16m
    • Long rail max. 16m
    Minimum distance to the edge of the roof

    600mm

    Inclination angle

    10°

    Material
    • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
    • Windbreaker: Magnelis
    • Mat S protective mat: EPDM
    • Small parts: stainless steel (1.4301) A2-70
    S-Dome 6.10
    Scope of application

    Flat roofs < 10° with single ply membrane or bituminous roof covering, also on concrete, gravelled or green roofs

    Fastening type/­roof fixture

    • Ballasted and no roof penetration for inclination: ≤ 3°
    • With fixed connection at inclination with Dome FixPro: > 3°
    Require­ments

    • Permissible module dimensions (L×W×H): 1448-2390 × 950-1170 × 30-50mm
    • Minimum system size D-Dome / S-Dome: 2 supports (4 modules) / 2 modules
    • Clamping at the short module side permitted (see module approvals…)
    Technical specifications Base rail

    • Rail set max. 15m
    • Long rail max. 12m
    Technical specifications Module row

    • Rail set max. 15m
    • Long rail max. 15m
    Minimum distance to the edge of the roof

    600mm

    Inclination angle

    10°

    Material

    • Peak, SD, mounting rail, MidPlate, EndPlate, Connector, Porter, MiniClamps: Aluminium EN AW-6063 T66 and AW-6082 T6
    • Windbreaker: Magnelis
    • Mat S protective mat: EPDM
    • Small parts: stainless steel (1.4301) A2-70

    Side views

    D-Dome 6 Seitenansicht
    D-Dome 6.10
    S-Dome 6 Seitenansicht
    S-Dome 6.10