ILSCO Lug

Grounding lug that attaches to the open end of the rail. It is most commonly used for rail-less and ballasted systems.

Dynobond 8"

The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.

CR Micro Inverter & Optimizer Mounting Kit

The CR Micro Inverter & Optimizer Mounting Kit is hardware that attaches micro inverters or optimizers directly to the rail.

MLPE, Module Frame Mount, Kit

The MLPE Module Frame Mount Kit is used to attach micro inverters or optimizers to the module frame.

K2 Ground Lug

Top mounted grounding lug compatible with all K2 systems.

Dome Mid Clamp

The Dome Mid Clamp is a commercial mid clamp available in multiple size ranges.

Yeti Clamp

The Yeti Clamp is K2 Systems' very own hidden end clamp, with enhanced aesthetics and simple installation.

K2 End Clamp

K2's End Clamp has a self-leveling base identical to the K2 Mid Clamp. It uses a 13mm hex socket for installation.

K2 Mid Clamp

K2's Mid Clamp has a self-leveling base identical to the K2 End Clamp. It uses a 13mm hex socket for installation.

EverFlash Tile Replacement Flashings

The EverFlash Tile Replacement Flashings are feature packed and are available in Flat, S and W tile profiles.

K2 Conduit Clamp Flashing Kit w/EverSeal

K2 Conduit Clamp Flashing Kit w/EverSeal comes with a miniature 5x8" flashing and preassembled waterproofing so you don't need additional sealant.

HEYClip SunRunner Cable Clip SS, S6404

The HEYClip SunRunner Cable Clip locks over the lip of the rail to manage wires on the side of the rail.

Wire Management Clip, Omega

The Omega Clip is a side channel cable clip for CrossRail and MiniRail systems.

Wire Management Clip, TC

The TC Wire Clip is a top-mounted wire management solution that is compatible with all of K2's rail profiles.

K2 Conduit Clamp SF, Kit

Specifically designed for seamless integration with our South Face System. Easily attach it into the chassis hole for effortless installation.

K2 Conduit Clamp CrossRail Kit

This Conduit Clamp kit is made to be attached directly onto the side channel of the CrossRail. Kitted with a T-Bolt set it creates an easy and quick installation to lay down conduit.

K2 Conduit Clamp, Kit w/EverSeal

This Conduit Clamp comes preinstalled with our K2 EverSeal for an easy and quick installation onto the comp shingle roofs.

K2 Conduit Clamp Flashing Kit w/EverSeal

K2 Conduit Clamp Flashing Kit w/EverSeal comes with a miniature 5x8" flashing and preassembled waterproofing so you don't need additional sealant.