Roof tiles and roof stones

We offer roof hooks for almost all clay tiles, pantiles and concrete tiles. 80% of all applications can be solved with our SingleHook 3S or 4S.

80% of all applications can be solved with our SingleHook 3S or 4S.

Even with difficult rafter spacing, you can build perfect solutions with CrossBoard or SingleBoard. For higher load requirements we offer the SingleHook Alpine. The SingleHook 3S long is installed for tiles with a larger overlap and can therefore also guarantee the use of the SingleRail for larger tiles. We offer special roof hooks for plain tiles or flat concrete roof tiles.

Our SingleRail system can also be installed with on-roof insulation by using different screws.

Compatible components

Corrugated fibre cement and corrugated sheet metal

For corrugated roofing, such as Eternit, we offer hanger bolts for wooden substructures.

They are available in many different lengths in diameters M10 and M12. They are all equipped with a seal and have an abZ in Germany.

Compatible components

Standing seam and round seam coverings

We offer various clamps for the area of sheet metal seam roofing. This allows you to build PV systems on almost all of these roofs.

The following profile types are possible: double standing seam, angled seam, snap seam and round seam (Bemo, Kalzip, Aluform, Rib-Roof Evolution).

Compatible components

Bitumen roofing

For bitumen roofing, installation can be carried out with the SpliceFoot.

By fastening in the rafter and in the wooden boarding, the installation of the SingleRail is simple and uncomplicated as usual. Sealing with the butyl layer pre-mounted on the component has the advantage that a secure and watertight connection to the bitumen roofing can be guaranteed.

Compatible components