TiltUp Vento System

  • 3 different elevation angles: 20°, 25° and 30°
  • Few components, many different module arrangements and suitable for larger modules
  • Flexible application options on the roof: ballasted with concrete foundation or direct connection with concrete anchors possible
Roof icons
Various roof connections

Various roof connections

  • Ballasted with concrete foundation: for almost every flat roof
  • Direct connection with concrete anchors possible
3 different elevation angles

3 different elevation angles

  • All module arrangements in 3 elevation angles available: 20°, 25° and 30°
  • Component connections identical throughout
Different module layouts

Different module layouts

  • Portrait/landscape possible
  • Clamping on the short or long side

 

 

Few components

Few components

  • Refined system with well thought-out connections
  • Enables systemic storage and flexible application possibilities 

Components

Downloads

Product data sheet and brochures

Assembly instructions and checklists

Technical data

 
TiltUp Vento
Scope of application

Flat roofs ≤ 3° on concrete, gravelled or green roofs

Fastening type / roof fixture

  • Ballasted with concrete blocks
  • Anchor directly into the concrete roof
Requirements

  • Permissible module dimensions (L × W): max. 2293 × 1135 mm
  • Clamping permitted on the short module frame side
Technical specifications

Thermal separation after a maximum of 15,5m

Inclination angle

20° / 25° / 30°

Material

  • TiltUp Vento Foot, Beam, Brace, SingleRail 36 or 50, Module clamps, Climber Set 36/50: Aluminium EN AW-6063 T66 and AW-6082 T6
  • AddOn: Glass fibre reinforced PA
  • Small parts: stainless steel (1.4301) A2-70
TiltUp Vento
Scope of application

Flat roofs ≤ 3° on concrete, gravelled or green roofs

Fastening type / roof fixture
  • Ballasted with concrete blocks
  • Anchor directly into the concrete roof
Requirements
  • Permissible module dimensions (L × W): max. 2293 × 1135 mm
  • Clamping permitted on the short module frame side
Technical specifications

Thermal separation after a maximum of 15,5m

Inclination angle

20° / 25° / 30°

Material
  • TiltUp Vento Foot, Beam, Brace, SingleRail 36 or 50, Module clamps, Climber Set 36/50: Aluminium EN AW-6063 T66 and AW-6082 T6
  • AddOn: Glass fibre reinforced PA
  • Small parts: stainless steel (1.4301) A2-70