K2 Dome 6 System

Solutions for all roof coverings. Clearly ballast-optimised system based on the latest wind tunnel standards.

K2 Base: Simple, fast and safe PV planning

Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project control. Google Maps integration and graphic drawing tools support and facilitate your planning.

Start planning
K2 Base: Easy, fast and safe planning

System Variants

Dome 6 Xpress

Time-saving alignment of the rails with the Dome Speed Spacer as well as a snap-in system for peaks and tool-free rail connectors.

Compatible components

Dome 6 Classic

Optimal use of space even with many obstacles for complete utilisation of the roof area

Compatible components

Dome 6 Classic LS

Suitable for higher wind/snow loads and for larger modules up to 2390 × 1170 mm. Based on Dome 6 Classic.

Compatible components

D-Dome 6 Lifted LS

Fastening with roof anchors for suspended installation above the roof membrane. Existing components for quick and easy installation.

Dome 6.15

a better angle of incidence and thus a higher yield can be generated.

Compatible components

System Highlights

Mat S

Thus, it is possible to work with low ballast despite high coefficients of friction.

Dome FixPro

The Dome FixPro is also recommended for roofs with low load reserves.

Speed Spacer

Suitable for all K2 flat roof systems

Installation on trapezoidal sheet metal

The well-known K2 D-Dome 6.10 components can be mounted on trapezoidal sheet metal for additional elevation on trapezoidal sheet metal.

Fall protection

The easy-to-integrate fall protection can be mounted on new and existing systems.

More

General building approval (abZ)

All system variants of the Dome 6 system have general building authority approval (abZ) no. Z-14.4-916. This applies to the entire system with all individual components.

Download

References

1/6

Downloads & Technical Information

Detailed information about our system can be found in the product catalogue.

  • Component overview
  • Requirements and mounting method
Downloads Technical data
Anwender beim Sichten der digitalen technischen Informationen