Bereich auswählen

    Triangle/MultiAngle System

    • High flexibility and individual solutions
    • Suitable for almost all flat roofs
    • Individually adjustable elevation angles
    • Universal module orientation
    Properties

    High flexibility

    Triangle and MultiAngle can be used on almost all flat roofs and on trapezoidal sheet metal roofing. It can be built with loose ballast, fixation in ballast elements or with gravel or green roof substrate on PE sheets. 

     

    For individual solutions, please contact our technical sales department.

     

     

     

    Individually adjustable elevation ­angles

    Individually adjustable elevation ­angles

    The yield can be optimised by different mounting angles depending on the location and roof. The Triangle System can be supplied with an elevation of 10-45°. The MultiAngle system can be adjusted individually.

    Universal module orientation

    Universal module orientation

    The module orientation can be vertical or horizontal. With the Triangle/MultiAngle system, landscape mounting is possible with the AddOn. In addition, with the MultiAngle system, clamping at the corners can also enable landscape mounting.

     

     

    References

    Components

    Downloads

    Product data sheet and brochures

    Assembly instructions and checklists

    Technical data

     
    Triangle/MultiAngle
    Scope of application

    Flat roofs, fields, or ground

    Fastening type/roof fixture

    Fastening or ballasting

    Technical specifications

    Thermal separation after max. 13.6 m

    Inclination angle

    10 - 45°, factory-default, or individually adjustable with MultiAngle

    Material

    • Mounting rails, module clamps: Aluminium (EN AW-6063 T66 / EN AW-6082 T6)
    • Also suitable for PE plates: Polyethylen (PE-Recyclat)
    • Small parts: Stainless steel (1.4301) A2
    Triangle/MultiAngle
    Scope of application

    Flat roofs, fields, or ground

    Fastening type/roof fixture

    Fastening or ballasting

    Technical specifications

    Thermal separation after max. 13.6 m

    Inclination angle

    10 - 45°, factory-default, or individually adjustable with MultiAngle

    Material
    • Mounting rails, module clamps: Aluminium (EN AW-6063 T66 / EN AW-6082 T6)
    • Also suitable for PE plates: Polyethylen (PE-Recyclat)
    • Small parts: Stainless steel (1.4301) A2

    Side views

    Side view