Easily realizing small ground-mounted systems without calculations? Previously, this was possible with our pre-assembled ground-mounted kits A- and P-Rack. These are now replaced by pre-assembled kits of our ground-mounted system N-Rack:

For module lengths > 1905 mm, the kit N-Rack 2.20 C (2004657) with 8 triangles is available.

Go to N-Rack 2.20 C Kit

For module lengths ≤ 1905 mm, the kit N-Rack 2.20 CS (2004656) with 6 triangles is available.

Go to N-Rack 2.20 CS Kit

The triangles are placed on concrete foundations, with the recommended dimensions being provided in the assembly manual. The regular assembly manual of the N-Rack 2.20 C/CS system applies here.

Go to assembly manual

Both kits are composed of 2 x 12 modules vertically with 20° inclination. Being designed for a snow load of 1.75 kN/m² with a wind load of 0.67 kN/m², they are easy and convenient to install in many locations.

Moreover, a system data sheet is provided, containing detailed information on the installation of the kits, including support distances, cantilevers, and permissible module sizes.

Go to system data sheet N-Rack 2.20 C Kit

Go to system data sheet N-Rack 2.20 CS Kit