Trapezoidal sheet metal

MiniRail auf Trapezblechdach

Mounting systems

Fixation in the roofing

Fixation in the substructure


K2 mounting systems for trapezoidal sheet roofs without fixing the substructure are fixed with self-tapping sheet metal screws in the high beading. The SpeedRail system is the classic choice, which is suitable for nearly all situations. In some cases, the MiniRail and MultiRail systems may be suitable.

Elevated systems are possible using D-Dome and S-Dome, since they are mounted on SpeedRail mounting rails. Otherwise, elevated systems can be created by combining the MultiRail system with the S-Dome Small system. Otherwise, Triangle or MultiAngle systems can also be installed on trapezoidal sheet metal This allows for flexible elevation angles from 10 - 45°.

For Klip-Lok and Klip-Tite sheet metal roofings we offer the RibClamp KL system.

  • Systems without elevation
    • SpeedRail
    • MiniRail
    • MultiRail
    • RibClamp KL
  • Systems with elevation
    • S-Dome Small 10° with MultiRail
    • S-Dome 10° with SpeedRail
    • D-Dome 10° with SpeedRail
    • Triangle / MultiAngle 10-45°


Matrix  Pitched roof systems
Recommendations for lightning protection and equipotential bonding
Matrix  Flat roof systems
Checklist  Corrugated fibre cement / trapezoidal sheet metal / sandwich panel (substructure fixation)
Checklist  Trapezoidal sheet metal / sandwich panel (roof sheet fixation)
TerraGrif  Potential equalisation