Our mounting systems cover nearly the entire spectrum of possible roofing and soil classes. We distinguish between systems for tiles, corrugated fibre cement, trapezoidal sheet metal, standing seams, or flat roofs. We offer tailored solutions for open-site systems.
We are delighted to create individual plans for projects that our standard products do not accommodate.
For many surfaces such as concrete, bitumen, foils, green roofs, gravel or trapezoidal sheet metal.
Dome 6.10 Systems
80% pre-assembled and 70% faster to install. Available elevated on one or two sides.
Dome V Systems
Time saving due to simultaneous assembly, reduced screw connections. Available elevated on one or two sides.
Dome Classic Systems
Assembly-friendly classics thanks to the use of fewer components. Available elevated on one or two sides.
S-Dome Small System
Suitable for flat and trapezoidal sheet metal roofs. Saves material and transport and has a secure holding force.
TiltUp Vento System
Many different module arrangements, suitable for larger modules and 3 different elevation angles: 20°, 25° and 30°.
Triangle/MultiAngle System
High flexibility due to individually adjustable elevation angles and universal module orientation.
For pantiles, plain tiles, monk nun tiles, slate roofing and concrete roof tiles.
With hanger bolts or solar fasteners for the different types of roofing made of corrugated fibre cement or Eternit, corrugated sheet metal or trapezoidal sheet metal.
Without fixation in the substructure or with fixation in the roof membrane or covering.
Fixation in the roofing
MiniRail System
Short rail system with universal module orientation and optimised for storage and transport with fewer components.
Fixation in the roofing
SpeedRail System
All-rounder with only 4 installation steps. Floating with controlled thermal linear expansion.
Fixation in the roofing
MultiRail System
Roof connection and module railing in one single component. Short rail or a flexible component in various lengths available.
Fixation roof covering/roofing
Insertion System
Sleek design with continuous closed surface adds further robustness.
Fixation in the roofing
MicroRail System
Fixing in the roof covering with self-tapping screws including sealing and without additional parts.
Fixation in the roofing
S-Dome Small System
Suitable for flat and trapezoidal sheet metal roofs. Saves material and transport and has a secure holding force.
Fixation in the substructure
SingleRail System
Quick and low-cost with direct lateral connections to the rail including customised height adjustment.
Fixation in the substructure
SolidRail System
Suitable for different load cases and many ranges of spans inclusive extensive range of rails.
Suitable for standing seam and round seam - penetration-free and fixed with sheet metal seam clamps.
SolidRail System
Suitable for different load cases and many ranges of spans inclusive extensive range of rails.
SingleRail System
Quick and low-cost with direct lateral connections to the rail including customised height adjustment.
RibClamp KL System
Ultra-quick assembly solution for roofing types: Klip-Lok® and Klip-Tite® with universal module clamps.
For all common soil classes - secure anchorages even for difficult soils and small off-grid installations.
