CompanyCompany
Pretty sustainable: the K2 DNA — Let's drive the energy transition forward together!More
Mounting systemsMounting systems
K2 GreenRoof 2.0 — Quick and flexible installation on green roofsMore
Digital ServicesDigital Services
K2 DocuApp —Paperless documentation of the entire system + extended warranty for the mounting...More
Large-scale projectsLarge-scale projects
K2 Pi-Rack — Proven K2 quality for large-scale ground-mounted systemsMore
Knowledge & Training CenterKnowledge & Training Center
KAI: The digital assistant powered by AI —Whether planning or installation: KAI provides you with smart support 24/7More
ContactContact
Find your dealer —A well-distributed network of local sales partners — find the right one.More
Menu
K2 Systems
Choose language
Czech
Dutch
English
French
German
Italian
Mexico and LATAM
Polish
Portuguese
Romanian
Slovenian
South Africa
Spanish
United Kingdom
United States
Continuous further development is necessary for the constantly pulsating market – with the Dome 6 system, almost every flat roof covering can now be covered. It is ballast-optimised due to improved friction coefficients of the shear-soft Mat S support pad.
The developments include, for example, not only the clamping of the modules on the long side, but also with the Dome FixPro the secure anchoring with fixed connection. For these optimised system variants, new names are now necessary for better differentiation.
Of course, these three variants with their updated names are now available to you in the K2 Base planning software.
The system variant Dome 6 Xpress is delivered already pre-assembled – the Mat S as well as the Dome SD are already mounted on the base rail. The peaks are also attached to the rail in no time at all via a snap-in function. In addition, the rail connectors can be installed without tools.
With only 4 installation steps, this system variant shines with its extraordinarily fast installation. The time-saving alignment of the rails with the Dome Speed Spacer ensures even easier installation. The modules are clamped on the short module side in the corner area.
Variants: S-Dome 6.10 Xpress | D-Dome 6.10 Xpress
With a flexible row spacing, the roof area can be utilised to the maximum. The Dome 6 Classic shows this to be an important success factor, especially on roofs with many obstacles.
The system variant can also be used on gravel or green roofs and is suitable for additional elevation on trapezoidal sheeting. The modules are clamped in the corner area on the short side.
Variants: S-Dome 6.10 Classic | D-Dome 6.10 Classic
In addition to the Dome 6 Classic system variant, the Dome 6 Classic LS system offers the option of clamping modules on the long side. This solution is used for large modules (up to 2390×1170 mm) with limited load-bearing capacity and for high snow and wind loads.
Variants: S-Dome 6.10 Classic LS | D-Dome 6.10 Classic LS
Share
Category Updates: Products
June 2026
March 2026
February 2026
December 2025
November 2025
SUBSCRIBE TO OUR NEWSLETTER
